Battery Size
Battery Type
Single 18650
Vape Hardware Brand
11cm (4.5")
5.0cm (2.0")
2.4cm (0.9")


Coming Soon!

Email Alert!

This product is coming soon. To receive an email as soon as this item becomes available simply enter your email address below.

*Please Note: This is a Mechanical Device designed for advanced users, please read this description in its entirety*

The Advken CP Squonk Kit is an unregulated mechanical vape device. The kit includes both the Advken CP Squonk Device and a 22mm BF RDA (Rebuildable Dripping Atomiser). The kit is powered by a single 18650 battery (sold separately). Please note, this a mechanical vape kit, it is intended for very advanced users only.

The CP Kit has a combined Stainless Steel, Aluminium Alloy construction with a plastic shell for sturdiness and a lightweight feel when used. The squonk bottle is easy to remove and reinstall and is made of durable material, a small slot on the mod allows the user to view the eliquid level. 

The CP Squonk Kit has a clean design to it, featuring only two buttons: one side-mounted firing button and a large top button that operates the squonk bottle, allowing you to wick your RDA with control. 

The CP BF RDA is a 22mm squonk RDA. Compact in size the CP is uniquely designed, it features a clamp build deck, that allows for single coil builds only. While it has an emphasis on producing flavour rather than clouds, it still fits multiple wire types including premade coils for a custom vape experience. 

A unique bridge on the build deck is located over the squonk hole to stop leaking when you rewick the CP RDA. The adjustable airflow allows for full control of your inhale allowing you the option of either mouth to lung or direct to lung vape. 


  • 1 x Advken CP Squonk Device
  • 1 x Advken CP RDA
  • 1 x Spares Kit
  • 1 x User manual


CP Squonk Device 

  • Single 18650 battery
  • Lightweight Construction
  • Squonk Bottle


  • 22mm Diameter
  • Single Coil Builds
  • Clamp Build Deck
  • Anti-Leak


Top Tips - Mechs Are Intended for Advanced Users ONLY

  • We don't recommend building below 0.2Ω
  • Always use an Ohms Reader to check resistance before using
  • For low resistance builds use high amp batteries
  • Ensure your battery wrap is intact
  • Ensure your locking switch is activated when not in use
  • Store your batteries safely in a case, never loose
  • Use a dedicated charger for batteries
  • Never leave charging batteries unattended
  • Dispose of batteries responsibly
  • Avoid short circuits by ensuring coils are installed as per manufacturer instructions

Battery / Amperage Guide (Do Not Exceed Limits)

  • 1.0ohms - 4.2A Amp Draw
  • 0.9ohms - 4.6A Amp Draw
  • 0.8ohms - 5.2A Amp Draw
  • 0.7ohms - 6.0A Amp Draw
  • 0.6ohms - 7.0A Amp Draw
  • 0.5ohms - 8.4A Amp Draw
  • 0.4ohms - 10A Amp Draw
  • 0.3ohms - 14A Amp Draw
  • 0.2ohms - 21A Amp Draw (RECOMMENDED LIMIT)
  • 0.1ohms - 42A Amp Draw (NOT RECOMMENDED)

Please note: This is a mechanical vape device, by pushing the fire button you complete a circuit that directly runs power from your battery through the device and into your RDA. This device does not have a chipset that you’d find in a regulated device, meaning there are no safety features apart from your own skill. We do not advise under any circumstances for a mechanical device to be used without a thorough knowledge and understanding of battery safety, battery output, Ohm’s law and vaping in general. This is a vape device for very advanced users only - this should not be used by beginners or casual vapers. If you have any questions or queries regarding mechanical devices or vaping in general, please contact us.

Asmodus Spruzza 80W BF Squonk Vape Kit
Asmodus Spruzza 80W BF Squonk Vape Kit
Single 18650 Battery Required, 80W Regulated Output, VW, TC
Aspire Feedlink Revvo Squonk BF Vape Kit
from £49.99
Aspire Feedlink Revvo Squonk BF Vape Kit
Squonk Kit, Single 18650 Battery, BF Tank, Semi-Regulated
Council of Vapor Wraith 80W Squonker Vape Kit
Council of Vapor Wraith 80W Squonker Vape Kit
Requires Single 18650 Battery, 80W Output, Squonk Box
Eleaf Pico Squeeze 2 100W Squonk Vape Kit
Eleaf Pico Squeeze 2 100W Squonk Vape Kit
100W Output, Includes 21700 Battery, 24mm RDA, Single Coil RDA
GeekVape Athena BF Squonk Kit
GeekVape Athena BF Squonk Kit
24mm Diameter RDA, Gold Plated Postless Deck, Aluminium Construction
Sigelei Fuchai 213 Squonk Vape Kit
Sigelei Fuchai 213 Squonk Vape Kit
Requires 18650, 20700, 21700 Battery, 213W Output, Squonk Compatible
Coming Soon!
Be the first to review this product.
  • We accept Visa, MasterCard, Amex
  • We accept Visa, MasterCard, Amex
  • We accept Visa, MasterCard, Amex