The Eleaf Pico Squeeze 2 Squpnk Kit is an upgrade to the original Pico Squeeze. This squonk kit is powered by a 21700 vape battery that comes as part of the kit, or with a 18650 vape battery (sold separately). Capable of a 100W maximum output it features an Avatar Chipset for advanced control.
The Coral 2 RDA has a 24mm diameter and has been designed for single coil builds with a coil and cotton arriving pre-installed allowing for a quicker setup.
The Pico 2 has a Stainless Steel construction which gives it a clean design as well as a reassuring weight. Designed with ergonomics in mind it fits well in the hand; a horizontal OLED Display is mounted on the front of the device, while the firing button is located at the back.
A silicone squonk bottle is installed in the device, it holds plenty of eliquid and is easy to squeeze. A vacuum sealing mechanism means that eliquid will travel through to the Coral RDA easily and quickly; it also stops over-saturation of your coils by allowing a greater degree of control.
The Avatar Chipset gives users access to multiple output modes, which suit a variety of coil builds and wire types including premade coils.
Variable Wattage Mode allows users to increase and decrease power up to 100W, this will help you find your ideal balance between flavour and clouds, it also means that multiple build types can be installed and used at different power levels.
Temperature Control Mode lets you a programme a maximum temperature you coil can reach before the device stops firing. This reduces the chance of dry hits and can help make your coils last longer. Please note that only certain wire types are compatible in this mode - including Stainless Steel and Nickel.
Finally, Bypass Mode lets the Pico Squeeze 2 act similarly to a mechanical mod, in that it will draw the maximum power from your batteries and route it straight through to your RDA. Not to worry, it will not bypass any of the inbuilt safety features of the mod.
The Coral 2 is a 24mm squonk RDA, it comes preinstalled with a bottom-feeding pin so it can be used straight out of the box with the Pico Squeeze 2. That being said the optional 510 pin that’s included means it can be used a range of standard vape devices.
The single coil deck is easy to build on and will fit a variety of wire sizes and resistances for a more custom experience. Single adjustable airflow allows you to configure your inhale for a breezy direct to lung vape for cloud chasing, or a more restricted mouth to lung vape to enhance flavour.
- 1 x Pico Squeeze 2 Mod
- 1 x Coral RDA
- 1 x BF Pin (preinstalled)
- 1 x 510 Pin
- 1 x USB Lead
- 1 x Spares Kit
- 100W Output
- Requires Single 18650, 20700 or 21700 battery
- Variable Wattage Mode
- Temperature Control Mode
- Bottom Feeding Squonk RDA
- Single Coil Builds
- Multiple Wire Types
- 24mm Diameter
Important Information About Rebuildable Devices:
This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and Ohms law.
We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.