Coilology Staggered Fused Clapton Handmade Coils

The Coilology Staggered Fused Clapton rebuildable coils are some of the most popular premade coils available. A range of different resistances and coil materials are on offer, so it’s easier than ever to find the coil that’s right for you. Compatible with a wide variety of rebuildable atomisers, these premade coils are the ideal choice if you don’t have time to build your own.

Features:

• Handmade Coils For Rebuildable Atomisers
• Low Resistance
• Stainless Steel/NiChrome
• Compatible In VW & TC Mode
• Complex Build
• Pre-Cut

Both the 0.1 Ohm and 0.18 Ohm versions of this coil feature Stainless Steel (SS316L) wire which offers a balance of vapour and flavour production. This wire type is compatible with both Temperature Control and Variable Wattage modes. The NiChrome (NI80) and Kanthal (KA1) coils  support Variable Wattage mode only, but deliver a fast ramp-up even at high wattages.

Contains:

• 2 x Coilology 0.23 Ohm NI80 Staggered Fused Clapton Rebuildable Coils (2 x (28 + 36))
• 2 x Coilology 0.14 Ohm NI80 Staggered Fused Clapton Rebuildable Coils (2 x (26 + 36))
• 2 x Coilology 0.18 Ohm SS316L Staggered Fused Clapton Rebuildable Coils (2 x (28 + 36))
• 2 x Coilology 0.1 Ohm SS316L Staggered Fused Clapton Rebuildable Coils (2 x (26 + 36))
• 2 x Coilology 0.33 Ohm KA1 Staggered Fused Clapton Rebuildable Coils (2 x (28 + 36))
• 2 x Coilology 0.21 Ohm KA1 Staggered Fused Clapton Rebuildable Coils (2 x (26 + 36))

Important information about rebuildable vape coils:

Rebuildable coils like these can only be used with rebuildable atomisers, such as RDAs and RTAs and RDTAs. We only recommend this type of coil to advanced vapers, who have a thorough understanding of vaping, Ohm’s law and battery safety. Rebuildable coils will need to have cotton wicks fitted to them before use, these are available separately.

Before use, all rebuildable coils should be tested on Ohmmeter (never a vape device) to check they are registering the correct resistance and are firing correctly. Please note that when using a dual coil build, the resistance of your coils will halve. For example, two 0.4 Ohm coils fitted to a rebuildable atomiser will register 0.2 Ohm.

Different types of coil can not be mixed and matched and you should always check that your vape device is compatible with the Ohm resistance of your coil/s before use.