Vandy Vape Mesh Wire comes in a variety of different wire types, including Kanthal (KA1) Stainless Steel (SS316L), and Ni80.
Designed for use with their Mesh RDA, the mesh wire can be used on any clamp-style post-less rebuildable deck that has a similar design to the Mesh RDA. Each Mesh Wire is five feet in length and can be very easily cut to size for use on a deck.
Please Note: We recommend using the pre-cut mesh included with the RDA as a template for cutting the best size from the spool which is approximately 10mm by 40mm. And for a perfect fit in the Mesh RDA you want to cut 3mm off of the length and 4mm off the width. So you will have a mesh cut that is 7mm x 36mm.
KA1 Mesh Wire
Ni80 Mesh Wire
SS316l Mesh Wire
SS316l Mesh Wire
Important information regarding Pre-made Coils and Rebuildables:
This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.
This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.
A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.
There are no customer reviews for this product. Registered members earn £1.00 in loyalty points for submitting the first product review!