The Vaporesso GTX Coils are compatible with a range of vape kits including the Vaporesso Target PM80 kit and Swag PX80 kit. Designed to support direct to lung vaping, these coils feature both a low resistance and mesh build for increased vapour and flavour production. There are two versions of this coil available, offering two distinct vaping styles.
The 0.2 Ohm GTX coil can be used between 45 - 60W and will produce the largest amount of vapour. The mesh build also heats more e-liquid at a faster rate to deliver improved flavour from e-liquid. The 0.3 Ohm GTX coils utilise the same quality mesh build but feature a slightly higher resistance. This means slightly less vapour production and a preferred wattage range of 32 - 45W.
When it comes to e-liquid, no matter which coil you’ve chosen a high VG blend will work best, with a 70% VG e-liquid remaining the most popular choice. Both of these coils also be paired with the Target PM80 SE and Gen Nano kit, the 0.3 Ohm can be used with the Xiron kit.
Important information about sub ohm vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they'll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher for the sub-Ohm coils and 50% VG or lower for the 1.2 Ohm coil. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
Do you have a question about this product? Why not ask our expert team.
By Phil Oates
Been using the .3 coils in the Xiron system.
Generally the coil life is good, expect around 1800 puffs on average.
However I feel the flavour is sometimes muted at the lower wattages. I have to use this at around 42W to get a good flavour whilst maintaining as much life out of the coil.
The GTX series is impressive and will be around for some time to come, but I feel they missed the mark on the .3/.2
By Johnny from UK
Great quality coils, they last a good week/week and a half and they're super flavourful
By Rob from Stoke-on-Trent
GTX coils are great, they just do what they are supposed to, last a good week or 2 each time and are reasonably priced for easy replacement. Never had any issues with quality control and they seem consistent in lifespan.
Use these coils (0.3ohm) in my Xiron vape at 40w lasts about 1500 to 2000 puffs when they start to loose flavour although don't taste burnt. great flavour and vapour production.
By Cameron from Wiltshire
Using swag px80. Ordered 0.3, 0.6 and 1.2 and so far have had good use out of each one. 1.2ohm is great little mtl style with good flavour and great battery life. 0.6 is cloudier as you'd expect but still good flavour, 0.3 is heavier clouds again and good flavour. Each have lasted me well so far, but used different juices with each coil so cannot compare flavour between the coils. Using lower end of recommended watt range and very happy with each one. I do recommend higher nic for 1.2 as with most mtl style coils (currently using 10mg nic salt dinner lady) and 3mg shortfills for 0.3 & 0.6.
By Pasquale from Uk
Best coil for DTL
By Bruno from Norfolk
We use the 0.2 coils and they are great and last about 6-8 days on a daily vape . Greta price too
These are some good coils. They usually last me 3-4 weeks. Highly recommend
By Joe from Uk
Love these coils, have ordered them a few times now and they’re high quality! Will definitely be ordering these again!
By Joseph from London
Great coils. Long lasting. Great flavour.
Prefer them to the voopoo pnp (which also fit vaporesso target pm80) as they last longer, the flavour is better and they're cheaper!
By HAROLD from Wales
These Gtx coils are amazing will last 4-6 weeks easy vaping love them
By Dan from Dorset
Having used these coils now for a good 8 months I have found that running that on my PM80 at 32watts I can get 10 days at least before they lose flavour. I used the 0.2 ones that came with the kits but they burnt out within a few days.
By Joe from Oxford
Have tired most of the range of these coils and have been happy with them all!
The 1.2 MTL COIL is great, good flavour and being able to control the airflow with the plugs makes a satisfying MTL hit!
Very happy would buy again.
Do have a bit of a difficult time visibly seeing when the coils are burnt out but I guess that's how it is with the MTL coils.
By Arranbeltz from Wales
I use the 0.6 ohm coils at around 22-25W and they work really well, giving a very nice flavour and coil life (even with very sweet juices!). Battery and juice last for long, very impressed.
These coils are amazing. Use them with my PM80 SE and they're amazing. Received delivery 1 day from order
By UpInSmoke from Essex
These coils last really long and doesn't lose flavour for ages
By Toffee from Stamford
Far better than the 0.3.
Along with rodeo juice, they are very long lasting too.
By Everton Fan from Stamford
In my experience these coils burnt out too quickly and the taste through seemed to disappear after a few uses.
I would recommend the 0.2 amp instead.
I averaged a coil every few days, however sometimes I would get as little as a day out of them.
By Everton Fan from Stamford
I have tried both the 0.3 and 0.2 available for my vape.
My experience is that the 0.2 last longer than the 0.3 and I tend to get a better taste through them.
By Benny from London
I prefer the 0.2 mesh, over the 0.3.
I sometimes use the 0.3 for a more mellow sub-ohm session.
Good flavour, can take a bit of a beating as well (have run these for over a week at max wattage, if not slightly over).
Considering these are coils for the PM80 pod kit, they are great value for what they are.