Steam Crave Titan PWM Mod

300W Maximum Output, Requires Four 18650s, Variable Voltage
Battery Size
Battery Type
Quad 18650
Made In
Max Wattage
Mod Features
Multiple Batteries, Variable Voltage
11cm (4.3")
4.1cm (1.6")
4.1cm (1.6")


Temporarily Out Of Stock

The Steam Crave Titan PWM is a vape mod intended for experienced users only. Powered by 4 x 18650 batteries (sold separately), this mod is designed for advanced performance and high voltage vaping with a simple operation. Compatible with a range of tanks and rebuildable atomisers, this mod boasts a number of essential protections as well as Variable Voltage Mode for a high-powered yet stripped back experience.

Constructed from durable materials, this sturdy box mod provides a solid design with a reliable build. With a maximum wattage of 300W, comparable to 8.4V, this super-powerful device is intended for sub ohm vaping. Due to the spring-loaded 510 connection port, it's compatible with a range of tanks and rebuildable atomisers of up to 41mm in diameter.

A 1.14-Inch LED screen on the front of the mod, displays output modes, atomiser resistance and battery life clearly. The device also boasts a large firing dial which serves to lock and unlock the device whilst also allowing navigation of the interface, striking the perfect balance of technology with simple operation.

The Titan PWM features Variable Voltage Mode allows you to directly increase and decrease power output using the firing dial. This allows you to program your ideal firing power for a customisable experience. You can match the power output to the resistance of your coils, permitting this device to be used with a range of tanks and rebuildable atomisers.

A host of safety protections allow help you get the most from your device, these include Low Voltage Protection, Short Circuit Protection and a 10-second Cutoff; all ensuring a safer and better vape experience.

The Steam Crave Titan PWM is a versatile mod intended to be paired with large tanks and rebuildable atomisers, with the power output to match.


  • 1 x Steam Crave Titan PWM Vape Mod
  • 1 x User Manual


  • 8.4V (300W) Maximum Output
  • Durable Construction
  • 1.14-Inch LED Screen
  • Large Firing Dial
  • Variable Voltage Mode
  • Safety Protections
  • 510 Connection Port
  • Compatible With a Range of Atomisers and Tanks

Important information about sub ohm vaping:

This is a sub ohm vape device, it will provide enough power to support coils that register below 1.0 Ohm. These are advanced devices that will produce large amounts of vapour and are not recommended for new users. To get the most out of these devices, you should use an e-liquid that is 60% VG or higher. 

These devices work at higher wattages, because of this we recommend that you use an e-liquid with a nicotine strength lower than 6mg. Featuring advanced modes, please ensure you consult your manual when setting up. Some sub ohm devices will use removable batteries if this is the case you will need a knowledge of battery safety.

Uwell Crown 4 Vape Tank
0.2Ω, 0.4Ω
Uwell Crown 4 Vape Tank
2ml Capacity, Leak Resistant, Triple Airflow, Plug and Pull Coils
dotMod dotSquonk BF Squonk Mod
£89.99 £59.99
dotMod dotSquonk BF Squonk Mod
Mechanical Squonk Mod, 18650 or 20700 Battery Required, Gold-Plating
Vandy Vape Lit 24mm RDA
£24.99 £9.99
24mm Ø
SAVE 60%
Vandy Vape Lit 24mm RDA
24mm RDA, Squonk Compatible, Multiple Coil Builds, Dual Airflow
Uwell Crown 4 Vape Coils
from £13.99
4 Pack
0.2Ω - 0.4Ω
Uwell Crown 4 Vape Coils
Uwell Crown 4 Tank, Stainless Steel or Mesh Coils
Vaperz Cloud Dreadnaught 25mm RTA
£39.99 £29.99
25mm Ø
2 Post
SAVE 25%
Vaperz Cloud Dreadnaught 25mm RTA
25mm RTA, 2ml Capacity, Top Fill, Two Post Deck, Single & Dual Coils

There are no customer reviews for this product. Registered members earn £1.00 in loyalty points for submitting the first product review!

Submit A Product Review