The Aspire Nautilus 2 tank is the successor to the original Nautilus and Nautilus Mini tanks. It features a 2ml capacity and a Top Filling mechanism, along with an expanded set of airflow options. This allows the user to dial just the right airflow regardless of coil choice.
Aspire have produced a new 0.7ohm coil for the Nautilus 2, and while it technically is a Sub-ohm atomiser, it's not really designed for the higher powered, direct-to-lung vaping, and should be considered a mouth-to-lung vape. The Nautilus 2 tank is also backwards compatible with the existing Nautilus coils, rated at 1.6ohm and 1.8ohms.
Important information about Sub Ohm Vaping:
These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.
We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.
By xO from Slovakia
First, I must say, that this is the best MTL tank in terms of flavour out there. The vape is warm, very pleasant. Love the design. But this tank is always gurgling after you fill it. I have two, one black and one silver and they both have this issue. After filling you have to use a paper towel to clean up the chimney. I can live with that, but begginers have to be more cautious. But the flavour!
By E from London
I've not yet had one issue with this tank. The flavour is excellent, the 0.7ohm coils at around 18w are what I've found to be the best quality vape. Some have complained of leaking and other issues but I've so far experienced none of this. Probably the best MTL I've owned. Would highly recommend to anyone.
The only down side is the 2ml maximum capacity but then again that's the TPD rather than Aspire's fault.
And I really have to give a thumbs up to VapeClub on their superb service as usual. Ordered this at 4pm yesterday (after losing my Zelos kit last week) and received it today.
By James from uk
This is a very well made tank for mtl hits. Don't over tighten the top cap. Then you will not have the coil unscrewing when you open it
By AJ from London
This was my first ever vape tank, and was exclusively MTL vaping with it.
It can be used for restrictively DTL'ing, but is very restrictive, even with the air flow fully open.
The flavour and vapour production is good.
Aesthetically it is a nice tank, but in practicality, it's a pain in the @zz to fill, if done up too tight, when unscrewing, 99.9% of the time, the coil unscrews too, making a leaky mess. Unscrewing it slowly and carefully can help, but it's unavoidable at times to get the sleeve off without loosening the coil.
If Aspire fix that problem, it will be a solid 10 star tank.
By Hammertime from Cambridge
My first step into what I'm classing as 'proper' vaping, away from the cigarette look designed disposables I was getting over the counter in corner shops, petrol stations and the like was with this tank.
A few issues initially getting used to replacing liquid, and took the coil out with the top casing once, making a complete mess, but aside form that all is well with design, and longevity (I've had this for over a year now).
I have recently moved onto DTL sub-ohm vaping, but keep this tank at hand for a nice smooth MTL vape in the mornings, with my Cool Fire IV
Be careful not to over tighten the casing when filling up, as it can prove very difficult to get the relevant grip needed to undo
By Adam from Gloucester
Where do i even start?
I have been vaping nearly 7 years now and I have genuinely never been so let down by a tank.
Gives off OK clouds, good flavor, HOWEVER...
The tank gurgles like crazy, filling it is a total pain, the coils are average at best with a high fail rate and the pyrex glass was literally stuck on when i came to change the coil. I have never been unable to get the pyrex off of a tank before. After 25 minutes of twisting, pulling, hot water, cold water, dish soap, I eventually applied so much pressure that the top half of the Pyrex shattered, yet the bottom half was still perfectly jammed in place. This led me to look online and see if other people have been suffering with the same issues I have just had, and believe me, there are ALOT of people that have had all of my issues and more with this tank. Do yourself a favour and do a simple 5 minute google search on this tank prior to purchasing.
Straight in the bin, would never ever recommend this tank to anybody in good faith.
You can get MUCH better from aspire at the same sort of price range.
By Terry from London
Yep loving it . Replaced my old sub tank mini . Big thx to Chris at VC
Purchased this tank to escape the leaky Smok tanks. Most things are great with this tank, good cloud production, rich flavours, nice design. The screw on top design is different to previous Aspire tanks, and is the weakness of this tank IMO. It seems to unscrew the coil a tiny bit or completely when you take the top off. To avoid this you need to be very strict when you refill and always check the coil is snug before replacing the top. Otherwise you get a very sticky mess leaking from the air holes. Overall a very nice tank from Aspire.
By Arron from Essex
Received lightning fast!!! I havent experienced the issues that many have with the filling of this tank it has been a dream. I had the origional nautilus and this is a great upgrade. Using the 0.7 coil great flavour and vapour production 10*
By Tom from U.K
I’ve had no problems with this tank at all, it looks stylish I bought a spare in a different colour to mix up the look. Only negative I would say is it could have a bigger tank, but it gets me through the day and I keep a spare vape juice in the car.