| Coil Resistance | 0.4ohm |
|---|---|
| Coil Types | Clapton Coil |
| Made In | China |
| RDA Airflow | Adjustable |
| RDA Deck | Squonk Pin |
| RDA Diameter | 24mm Ø |
| RDA Posts | Postless |
| Weight | 38g |
| Height | 2.7cm (1.1") |
| Diameter | 2.4cm (0.9") |
£11.05
The GeekVape Talo X RDA has been created to offer a more versatile vape. Recommended for advanced vapers only, this Rebuildable Dripping Atomiser can be customised to suit your individual style thanks to compatibility with both single and dual coil builds, as well as a responsive adjustable airflow system. Fitted with a 510 pin as standard and including a hollow BF (Bottom Filling) pin, the Talo X can be paired with the majority of vape mods, including squonk mods.
Features:
Crafted from Stainless Steel, this RDA is very hardwearing and easier to clean; while at the same time remaining easy to disassemble thanks to quality machining on all parts. This ease of use extends throughout the Talo X’ design. The postless deck greatly speeds up the coil-fitting process, with wide terminals holes allowing for lots of different rebuildable coils to be used. A coil cutting tool is included with each RDA, ensuring you end up with the perfect size coil every time.
When it comes to airflow, you can quickly adapt the Talo X to perform equally well at either MTL (Mouth To Lung) or DTL (Direct To Lung) vaping, with the option of delivering either a restricted or wide inhale. Featuring a grid layout; the dual adjustable airflow, when used in conjunction with either a single or dual coil build, helps deliver a vape that suits the individual's needs. Overall, offering elements of customisability and an entry-point to the world of rebuildable atomisers, the Talo X is a performance-driven piece of hardware.
Contains:
Important information about Rebuildable Dripping Atomisers:
Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.
Before building or using an RDA you should have a thorough knowledge of battery safety, Ohm's Law and vaping in general.
Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.
(214)
(17)
Do you have a question about this product? Why not ask our expert team.
By Mark Eckett from Sheringham
Put two coils in it the first time I used it and it worked extremely well. A perfect RDA for someone starting out.
By Phil from Blackpool
A great simple dripper!
And provides very good airflow and better flavour than RDA's three times the price!
Postless deck makes it much easier to build on.
Would recommend placing the coil(s) a little lower to avoid heat transference to the mouth, and getting a taller 810 drip tip too.
By Vin from Watford
Does exactly the job that it is supposed to do. Easy to build, good flavour. I would suggest to buy a new drip as the one on it is to close to your mouth.
By Andrew from Dundee
i bought this as a first go at trying an rda and i am quite enjoying it so far. easy to build on and decent flavour from it. only downside if you can call it that, is the airflow is a tad on the restricted side, apart from that, it is well worth the whole £11 and 5 pence i paid for it so full marks from me this time.
By Alex from Manchester
Fantastic little RDA that squonks really well. It’s small but because it’s postless it’s really easy to build on and it’s go a surprising decent well for your liquid so you’re not squonking on too much of a regular basis. I’ve been using this on a vandyvape pulse 2 and it’s been a fantastic match. You might want to change the drip-tip as you’re very close to your coils depending on the size of the coils you’re popping in. I’ve been on 30mm SS316 claptons and it’s been a joy and a such a fantastic price.
By Sub Ohm from Dover Kent
I bought this RDA, and couldn't choose better, this tank is awesome, nice, smooth airflow, easy to build, spacefull, vaping on it, its enjoyable, amazing flavour, clear, dense and decent clouds, is also a pron that Geek Vape giving you coils and Cotton, essential spare parts included.
If you are squonking, better be carefull, easy to oversquonk, besides i highly recomend this product.
Thank you Vape Club for quick delivery
By Nosmo King from Shires
At this price why wouldn't you have a go at this? So I did.
It's nicely machined, really solid airflow cap and a stepped adjustment in the Top Cap but with no Stop.
The base has a kind of fine sand blasted finish inside, and the little island style build deck leaves loads of room in the juice well.
Very easy to build on and get it right first time (I managed it!) and a very decent vape.
The Squonk action is ok but as the liquid seeps out of side holes in the post, and the liquid is therefore immediately taken up by the wick, you don't see much going on when you look down and squeeze. This means you can over-squonk without knowing until juice comes out of the airflow. I suppose it does mean the juice is going straight where it needs to be though, and with a bit of trial and error it's not that hard to master.
Comes with cotton, coils, a little GV signature orange Tri-Tool AND a Coil Cutting guide tool thingy along with all the normal little bits.
I've got my Talo in stainless on my red resin Pulse 2 with a beautiful shiny Bubba style drip tip in red with crushed gold leaf. I've put the supplied Ultem looking drip tip on my Gun metal Nightmare - both look rather good!
I'm going to buy another one at least. I recommend them to you! :-o
