£19.99
The Innokin Scion 2 vape tank is a 2ml vape tank, that features an innovative slide top mechanism, which reveals a large juice port for faster and cleaner top filling; this port fits a variety of bottle nib sizes. The Scion 2 has a 24mm diameter and fully controllable bottom airflow for an increased or restricted inhale.
The newly designed Plexus Coil offers increased flavour and cloud production, thanks to it's 0.15 Ohm resistance. What sets these coils apart is the new coil structure and the use of mesh, rather than traditional wound coil wire. The mesh allows for a faster and more even heat, this combined with the new cotton increases the overall lifespan of the Plexus Vape Coil.
Contains:
Features:
Important information about sub ohm vaping:
This vape tank is intended for sub ohm vaping. Sub ohm tanks require a greater amount of knowledge and experience to use safely. They use specially designed coils that register below 1.0 Ohm resistance, for use at higher wattages.
We recommend that when sub ohm vaping, you do not use an e-liquid that has higher than a 6mg nicotine strength, this will be too harsh on the throat. Sub ohm vaping produces more vapour and because of this, an increased throat hit. You should pair tanks like this with a high VG e-liquid, that is 60% VG or higher.
By WAR from Cheshire
I love this tank, I've got two and they've been my daily drivers for a while now.
I've had no issues with breaking the glass and I've dropped them several times.
My actual mod broke and the tank survived.
Only con is price of coils.
BUY THE MESH COILS.
By Justin from St Albans
I bought this tank and have had this tank for over a year now, the coils are great and last really well,
the only downside to this tank is that it leaks, this is the only flaw with this tank
By Ryan
Got this tank as my normal set up broke just before my holiday.
Liked the slide top cap, untill it started to slide open in my pocket. The filling hole isn't that big, so bit of struggle to fill. Also with the size of coils, doesn't leave much room for the juice to enter properly. So if your using thick juice, it will be a pain to fill as it bubbles up.
Flavour is okay, hasn't got anything on the falcon tank and coils.
By Dan from East Sussex
Flavour from these tanks and mesh coils is fantastic. Would definitely recommend. Works great on my Innokin Proton and my iJoy Saber 100.
By Mikeapollo from Manchester
I've always liked Innokin kit since they launched the iSub-S and I generally prefer a tank over an RDA when out and about but at home I tend to use my Vandy Vape iconic for a full flavour vape. This is a very impressive tank that provides the best of both worlds.
I had heard good things about the Scion II tank so I thought I'd give it a go. The first thing that stands out is the build quality - it is everything you would expect from Innokin with smooth machining, perfect paint job and a solid build with the usual innokin adjustable airflow. In the package you get the tank, two coils, a spare glass, vape band, spare drip tip and replacement rings and grommets.
It is a top fill tank and to fill it up you have to remove the drip tip which "locks" the top and then slide the top "open". You're then greeted with a generous sized hole to add your juice to. This makes filling very easy with little chance of loosing any of your juice. When you pop the drip tip back, it fits very snuggly and locks the tank so it will not open accidentally while in your bag. Changing the coil is just as easy too - simply by unscrewing the bottom and popping a new coil in.
Vape Club - as always - offer the very latest version which comes with two of the new Plexus mesh based coils. These coils are absolutely *HUGE* and looking at the coil itself you can clearly see the mesh coil surrounding the wicking. The coil itself has four large slots in it where your juice is absorbed into the wick - and this works exceptionally well even on a new coil at a high wattage.
I decided to try this tank out with a 0.15ohm coil and a bottle of Charlies Chalk Dust Big Belly Jelly. Coming from iSub coils, I am aware that for the best experience it's best to add a few drops of juice to each of the "slots" on the coil and to moisten the wicking to prime the coil. I then filled it up using the very neat top fill and let it sit for 10 mins. During this time I tried the same juice on my Vandy Vape Iconic - so I had something to compare to.
The 0.15Ohm coil is recommended to vape between 70 to 110w and I'm using a Smoant Cylon to test the tank. Starting at 70w, immediately the flavour flooded though with exceptionally smooth airflow on the drag. Cranking it up to 100w the flavour is exactly as I am used to from my drippers - the vape at 100w is warm but not overly "hot" and vapour production along with flavour is excellent. There was no popping or juice being spat into my mouth (Something RDA users will be familiar with if they need to rewick!). The mesh coils also heat up exceptionally quickly so with the right chipset in your vape - expect instant responsiveness.
It is a thirsty little tank - however I feel the 2ml capacity is actually about right as it means, just like using an RDA, your juice is always going to be fresh and flavoursome - meanwhile you have the benefit of being able to pop it into your bag knowing that unlike an RDA it is not going to leak.
So to sum up - this is an excellent tank if you want the flavour you would expect from a RDA but the convenience of a coil-based tank system. The positives are the airflow, flavour production, quality and ease of use. The only one downside is the drip tip is a custom one - so you might not be able to swap it for an old favourite, but this is not really going to be an issue as the drip tip itself is well designed.
Overall, an excellent tank!
By Nicola from Lincoln
This is my new favourite tank, especially when fitted with fat boy glass. Very nice, smooth vape with great clouds and great flavour. The coil lasts very well, I've found they last longer than the majority. A stylish looking tank, there's nothing I don't like about it.