Oxva Arbiter Solo RTA

The OXVA Arbiter Solo RTA is a 25mm Rebuildable Tank Atomiser that includes features that both improve performance and make it easier to use. The Arbiter boasts a leak-proof RDL (Restricted Direct To Lung) airflow, due to the air intake being at the top of the tank instead of the bottom. This 2ml RTA has a single coil build deck and features a 510 connection, meaning it can be paired with most vape mods.

Features:

• 2ml RTA
• Supports Single Coil Builds
• Dual Airflow Control System
• Two Post Clamp Deck
• 510 Connection

The Arbiter Solo has a unique dual airflow control system design, with airflow coming from top to bottom and side. Turning the top ring to the left closes the side airflow, which suits an MTL vaper. However, if turned to the right, you’ll experience an RDL vape. The deck’s wide coil ports will accommodate most rebuildable coils, plus the ports will accommodate a range of cotton wicks. Its two-post clamp deck has been made so that you can cut away any excess coil after installing, ensuring a perfect fit every time.

A key benefit of an RTA is that you have control over what type of coil setup you use and essentially create a vape that’s ideal for you. However, an RTA is as easy to refill as many standard tanks and the Arbiter Solo is no different. Simply unscrew the top, fill with up to 2ml e-liquid, then once the top is screwed back on, you’re all done. In the box, you’ll find most of what you’ll need to get started, including both a prebuilt coil as well as a cotton wick, so you can get started straight away.

Contains:

• Arbiter Solo RTA
• 2 x 2ml Spare Glass
• Fused Clapton Coil
• Shoelace Cotton
• Accessory Bag

Important information about Rebuildable Tank Atomisers:

Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.

Before building coils or using an RTA you should have a thorough knowledge of battery safety, Ohm's Law and vaping in general.

Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.