The Vandy Vape Maze Sub Ohm BF RDA is a squonk compatible 24mm RDA (Rebuildable dripping atomiser) - that uses an innovative new coil system ideal. We recommend it for advanced users who are just beginning to use RDAs.
What sets the Maze apart from other rebuildables, is the Maze BF Vape Coil. The 0.2 Ohm coils turn the Maze into a mix between a sub ohm tank and an RDA. With it's unique stove top design, the coil is prewicked with cotton, is simple to screw in and has a firing range of between 50 - 100W.
When used with the pre-installed bf (bottom feeding) pin, the Vandy Vape Maze is primed by simply squeezing your squonk bottle, allowing liquid to travel through the BF (Bottom Feed) pin and into the 5mm approx. juice well.
The Maze Sub Ohm BF RDA, can be used with standard boxes by installing a 510 pin. In the kit there is a 510 Pin and Refill Tube, which when installed in the rda allow it to be used as a standard RDA… with a twist.
Rather than dripping directly onto your coil, you drip your eliquid into the Refill Tube where it will flow directly into the juice well. It has been reported that this may reduce the capacity of the amount of liquid in the well, down to 3mm.
There are five airflow grids located at the top of the Vandy Vape Maze RDA, allowing you to control airflow efficiently, for a tighter draw or cloud chasing.
Overall, this is an inventive and well-designed RDA that can be customised for a unique vaping experience.
Important information regarding Pre-made Coils and Rebuildables:
This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.
This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don't advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.
A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.
By Jojo from Tipton UK
I was very sceptical about this tank I brought it as I'm not great at building and what this had to offer was a rda with a built in coil or a sub ohm
I used it as the squonk at first but didn't really take to that
So I changed the pin over to a sub ohm and my oh my great taste great clouds sits really nice on my drag
I'm using it at 60 to 65 watts okay ever So often you have to tilt it to get the juice on the coil but it's nothing for what this can do . It holds 2ml of juice
Only con would be nice if it had a clear tank so you can see your juice