*Please note: The Wotofo Recurve RDA comes with a 510 BF (Bottom Feeding) Pin pre-installed. A regular 510 Pin comes as part of the kit, but will have to be installed if you plan to use the Recurve with a standard vape mod.*
The Wotofo Recurve RDA is a 24mm RDA (Rebuildable Dripping Atomiser) that has been designed and created in collaboration with Mike Vapes. Unique airflow, concave design and single coil build deck really set this RDA apart. The Recurve is intended for advanced users only.
The Recurve has been designed for enhanced flavour, The Stainless Steel construction promotes a cleaner taste for a purer vape. The concave shape of the top cap allows for a greater concentration of flavour compared to standard RDAs. The 810 drip tip has the same curvature as the Recurve itself, again creating a deeper flavour.
The postless build deck has been designed for single coil builds only, the coil ports are large enough to support a variety of wire types, including premade coils. The Recurve features a U-shape design with dual six-hole airflow that matches up with the top cap; this adjustable airflow not only increases flavour it reduces spit back and leaking when being used.
Coil builders and direct to lung vapers looking to get more out of their eliquid should consider the Wotofo Recurve for a deeper flavour.
Important information about Rebuildable Dripping Atomisers:
This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and Ohm's law.
We don't advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.
Registered members earn £0.50 in loyalty points for every published product review!
By Stuart from Ayrshire
Had only used the Wotofo Profile for building before this purely because it was so easy. Decided to try this as I thought being single coil and postless, it would be simple too, and it was. Really good flavour from it and like that I can squonk or use as a dripper. Very well made RDA and happy I bought it
By Dennis from Netherlands
This was my very first rda that i bought, it is simple to build on and wick is easy aswell. Love the shape of the cap + a nice drip tip that you get with the rda. I used it for a while then moved on to dual coil rda's like the Drop dead & Bonza 1.5 and right now im using the kennedy 25m rda. But if you are thinking to buy the Recurve rda i would go for the Recurve dual rda, You can build 1 big single coil in there and if you want to go for dual coil you dont have to buy a new rda again.
By Giles from Sussex
Bought this as my first RDA based on reviews. It's a very good starting point, super easy to build on, great flavour and it feels high quality. I don't have a squonker, so you have to redrip very frequently (every 3-5 puffs) due to the small juice well, but that's fine for me. The top cap gets very hot though, so watch out for that.
By Tsmith from Cambridge
having decided that the Aspire Clieto was the last tank i would ever need i had put off the leap to rebuildables. That is until the glass broke and i could not get a replacement quickly. At a relatively low price point and with a wealth of glowing reviews i decided to finally make the leap with the recurve. Boy am i glad i did!
Incredibly easy to build on as a complete newcomer to rebuildables, the recurve provides a sweetspot between airflow, flavour and temperature that is perfect for me.
In over 3 months of use i have yet to experience any spit back whatsoever and the depth of flavour from this compact little beast is amazing. The curved design also looks good on my mods.
As a downside the small juice wells mean that it requires almost constant dripping. However once i paired this up with the equally excellent Dovpo Topside Squonk Mod this has become my go to setup.
if, like me, you have been considering making the leap to RDA's then i can wholeheartedly recommend the recurve as an excellent and simple place to start.
By Andy from Nottingham
This is a fantastic piece of hardware! Excellently machined and sturdy, it's simple to build on and easy to wick as well.
The air flow is smooth and the flavour is incredible!
Only had a small bit of difficulty removing the pre-installed squonk pin but this wasn't too much trouble.
Fantastic service from Vape Club once again too.
By kev from Hertfordshire
Excellent bit of hardware easy to build on excellent flavour, quality engineering I'm squonking with it at the moment but I have tried dripping excellent flavour on that to so if your thinking of buying a Rda just do it you wont be disappointed
By DB from Surrey
My other half got this for me in Rainbow for my birthday, and it looks great on my Pulse 80W with the Seaweed Green panels (a better colour match than I dared hope). Haven't come across a single negative in the week or so I've had it. You can't really go wrong with coil installation, but do be careful not to overwick. The draw is so smooth and it's the perfect combination of flavour and clouds. My mod reads the coil and 'presets' the wattage, so using the coils provided (Clapton at 0.25 ohms), it defaults to 45W. I've experimented with higher wattage but it's not needed - I get a perfect vape at that 45W level. Provided you wick well, you can squonk the bejesus out of it and it STILL won't leak. I love everything about it - it's a perfect squonk RDA. For a single coil device at low-ish wattage, it gives a better vape than the other RSA I've been using (Dead Rabbit with dual Ni80 build of 0.14 ohms at 65W). Similar warmth and clouds, but the flavour is even better (and the Dead Rabbit tastes great). Very impressed.
By Diggertron from Leicester
This is my first foray into the world of RDAs RTAs etc, but this is an absolute piece of cake to build on.
For someone that is looking for ease I would highly recommend its an absolute dream, I am currently running this as an RDA and have noticed that if your not careful it can leak (this is more than likely due to my inexperience) Flavour is stellar and cloud production is brilliant, can't wait to get a squonker and see what this little beast is capable of.
By Wetwire from Ayrshire
For once a product that deserves the hype it has been getting. The flavor is really good from this atty. This is the easiest RDA to build on with its single coil and the measuring tool used for trimming the legs. Some reviewers have failed to mention that this comes with a couple of coiling tools. Simply slide your coil on the tool and trim the legs exactly level with the leg of the tools shorter leg. It is then a perfect height for the airflow holes. This atty can produce pretty decent clouds for a single coil. I bought the gold one and it looks stunning. I am going to get another one or two. Super fast delivery from Vape Club too. Really pleased