| Coil Resistance | 0.4ohm, 0.6ohm, 0.8ohm, 1.2ohm |
|---|---|
| Coil Types | Mesh |
| Made In | China |
| Pack Size | 3 Pack |
| Pod Coil Type | Mesh |
| Tank Capacity | 2ml |
£8.99
The OXVA Xlim V3 pods are compatible with a wide range of OXVA Xlim vape kits and a few Dovpo Ayce devices. These pods contain built-in coils in a range of resistances, so they can be used for MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping.
Refilling the Xlim V3 pods is easy, just lift up the stopper on the side to reveal the filling port. The built-in coils come in four resistances, ranging from 0.4 Ohms – 1.2 Ohms. This means they’ll create a small amount of vapour for an MTL vape or slightly more for an RDTL inhale. Plus, the built-in coil design allows you to simply replace the whole pod when the coil inside is finished. Their mesh design heats your e-liquid faster for better flavour.
1.2 Ohm OXVA Xlim V3 pods are compatible with the following vape kits:
Xlim Pro, Xlim Pro Pod Salt Edition, Xlim SE, Xlim SE Classic Edition, Xlim SE 2, Xlim SQ Pro, Dovpo Ayce Mini
0.6 Ohm & 0.8 Ohm Mesh OXVA Xlim V3 pods are compatible with the following vape kits:
Xlim Pro, Xlim Pro Pod Salt Edition, Xlim SE, Xlim SE Classic Edition, Xlim SE 2, Xlim SQ Pro, Dovpo Ayce Mini, Dovpo Ayce Pro
0.4 Ohm OXVA Xlim V3 pods are compatible with the following vape kits:
Xlim Pro, Xlim Pro Pod Salt Edition, Xlim SE 2, Xlim SQ Pro, Dovpo Ayce Pro
No matter which option you go for, we recommend pairing these pods with 50% VG or higher PG e-liquids.
OXVA Xlim V3 Recommended Wattages:
(376)
(334)
(33)
(94)
(74)
(43)
Do you have a question about this product? Why not ask our expert team.
Registered members earn £0.50 in loyalty points for every published product review!
By Ems from Sunderland
I bought these pod cause I had bought a different set from the range and they leaked loads so I bought these ones hoping they would be different but these leak just as bad. The inside of my oxva xlim se is soaking off the pods leaking and loosing too much liquid aswell. Think I may have to change the unit. Very disappointing as I really liked this one.
By Dan from Macclesfield
Easy to fill up. Lasts about 2 weeks so great value. Flavour always good
By JLo from Somerset
Get on so much better with the 0.6, easy to fill and they last well. Found 0.8 didn't last as long. Best price too from vape club.
By Hayley from Kent
To start with was using 0.8's but they leaked after the first or second refill. Have been using 0.6's quite happily with no leakages. Much better.
Easy to fill and easy to see how much liquid is remaining.
By Jim from Essex
I float between the 0.8 and 1.2 ohm pods. Usually last really well, if I find a vape juice that burns them out too quickly I just try to avoid using those again. most flavours will do a good 30ml before they start to taste off in these pods.
By Steve from West Bromwich
Great pod no leaks flavour outstanding these are the best pods I have ever had.terrific
By Jordan
No major performance difference from the old ones but the top fill is a nice improvement, always a solid coil.
By Gen
I use the 0.4ohm coils and they are the best for me so far. They don’t leak. Very pleased.
By Bella
These 3X pod packs are my absolute go to. Paired with Wick Liquor Contra 10mg they last for weeks sometimes closer to month(s) before the flavour starts to loosen. Easy to refil on the skde too 👌 price on the market for three A*
By Puff
I've found these pods to be quite hit and miss. When you get a good one they're really good. Amazing flavour and last for a long time. I've even gone to nearly 4000 puffs on one of the 1.2s before the flavour started to diminish.
However I've had various bad ones that start leaking and spitting after the first refill. I'm not overly keen on the fill system either. I wish they would release the CRC top fill versions here that are available in other regions.
I find using 20 mg nic salts in the 0.8s quite overwhelming too. So for me 1.2s for 20 mg and 10 mg in the 0.8s is the best combination.
By Chlo from Essex
Easy to fill last me pretty long even with sweet juices I use the 0.6 haven’t tried any other resistance as like this one
By Adam
The 0.8 ohm pod is unmatched, giving on average 1500-2000 puffs per pod before any dropoff
By Steve from West Bromwich
Gives a nice smooth vape flavour is very good.I prefer the 0.8 though for flavour
By Elias
Would have hoped they would last a bit longer but they are decent enough to recommend.
By Kyle from Brighton & Hove
I ordered the 0.6, I normally have 0.4 pods. 0.6 pods are okay.. flavour is nice but they use way to much liquid, so having to fill up all the time. For anyone looking at what pod to buy I’d recommend the 0.4.
By Lee from Nottingham, Uk
Personally I feel the 0.4 is better for flavour than the 0.6 ones I have been using, also these have the top fill which are easier to refill.
By Harvey from London
These leak barely ever, and I find that it is a lot easier to refill than the previous generation pods
By Ez from Leics
I have always had the V2 pods but thought new is usually better they are same shape on the mouth which is good, but filling them is so much easier and also if you get any leakage which occasionally happens with all pods it won't go on to the connectors inside the vape so defo am improvement. I will get these ones from now on.
By Kitty from Surrey
I brought the wrong ones by mistake however the flavour is sooo much better with the 0.6. It doesn't like the super sweet juices too much but they last long enough. Very happy with them.
By Chris from Exeter
Refil pods are an absolute joke, they rip out far too easy and you cannot put it back together forcing you to buy new ones
