The Smok Nord Coils have been designed for use with that Nord Pod Kit and any kit that uses Nord or Nord RPM pods. There are multiple versions of this coil available, allowing you to configure your kit for MTL (Mouth To Lung) or DTL (Direct To Lung) vaping.
The 0.6 Ohm mesh coils have been designed for sub ohm vaping, the benefit of mesh technology is that each coil has a larger surface area which in turn heats up more e-liquid faster for improved flavour and cloud production. They should be used with e-liquids that are 60% VG or higher.
The 0.6 Ohm Nord Pro coils have a lattice mesh design, which produces a thicker vapour than the original mesh pattern. For best results, we’d suggest use with e-liquids that are 70% VG or higher.
The 0.6 Ohm DC coils feature a dual coil build, this means that they offer a fast ramp-up for a boost in flavour production. The lower resistance of these coils means they should be paired with a high VG e-liquid.
The 0.8 Ohm mesh coils work similarly to the lower resistance version, the slightly higher resistance means that they will produce less vapour and deliver a more flavour-focussed vape. They work very well with 60% VG e-liquids.
The 0.8 Ohm DC coils rely on a dual coil build to ensure a faster ramp-up, while at the same time offering discreet vapour production. Much like the mesh variant, this 0.8 Ohm coil works well with a 60% VG concentration or higher..
The 0.9 Ohm Nord Pro coils also have a lattice mesh design, which delivers an improved flavour and vapour that has a more cigarette-like feel. This variant is ideally vaped with an e-liquid that has a 60% VG concentration or higher.
The standard 1.4 Ohm coils have been designed for mouth to lung vaping and offer a more restricted inhale resulting in less cloud. These coils work best with high PG e-liquids that are 50% PG or higher, including salt nicotine blends.
Finally, the 1.4 Ohm ceramic coils, feature a ceramic build that has a longer lifespan than standard coils and produce a better flavour from e-liquids. We again recommend using 50% PG and high PG e-liquids.
Important information about sub ohm vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they'll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
Do you have a question about this product? Why not ask our expert team.
I enjoy these coils for my Smok RPM40, very easy to plug n play.
Not my favourite vape, no flavour gets through at all
Decent value for nord2
Really good flavour and draw to start, but don't last long. I'm lucky to get 5 days per coil using 70%vg liquid.
By MintyFresh from Worcester
In comparison to other coils these do burn out quicker. They are treated the same and all measures are taken for a longer life. They just don't go the distance when compared. However when not comparing against others they do their job and do it well. No regrets.
Best coils in the range, start at 7w and work up to 13w, few duds here and there but to be expected
By Mae from Sheffield
Great coils for MTL vaping.
Enjoyed on Smok Priv 19 vape.
Im not sure if im doin something wrong but i seem to be going through the coils quite quick. They burn out and they do leak abit if you fill to the top. But they do the job.
By Graham from England
I vape using the 0.8. Awesome draw on them and just right for me
By Chopsa from London
I tried the 1.4 ceramic in my Nord. They gave too tight a draw for me, also only 2 out of 5 worked, I threw the other 3 away because they didn't draw at all.
I now use the standard 1.4 coil which works fine with the original Nord, but you never get the whole 5 work OK, it's just a downside of the Nord coils which I put up with because it's a great kit when it works and the coils last well when they do work. On average I get 3-4 out of the pack of 5 there's always a dud.
By Zeus from Leicester
Decent coils but do leak a little bit if filled to the top. I advise filling your pods 80-90% of the capacity.
By Baz from Wales
great coils with great flavour, thanks vape club
By Fiz from Walsall
coils are not the best!. leak loads.
By Asal from London
These coils can tend to leak but are very smooth when properly fitted and smoke well. The only downside is that they don’t fit all the sizes of the pods and you have to check which one you’re buying first :/
These coils are okay. Notoriously leaky, but do produce a decent amount of vapor.
By Nat from London
I've ordered the 1.4's from a variety of places, they just never seem to last long. I was using with the Nord 2. In the end I just bought a new vape from a different brand as was fed up with smok coil issues. Only good thing is the low price point - that being said you end up spending loads as they burn out so fast.
By Me from Uk
using these coils for a while with my pod device and pleased to say no issues so far
By Sammy from North West
In the main, these are really good. Normally last between 1-2 weeks depending on usage. On the rare occasion there may be a faulty one that only lasts a day or so but this doesnt appear to be a pattern. The 1.4 works really well with the salt liquid.
By Andrew from Watford
decent flavour goes quick though
By Helsbells from Scotland
I love the initial flavour from these 1.4 coils but you never know whether they will last. Occasionaly get one that will last 2 weeks and then have one that is burnt out within a day. Smok sort out your quality control!