The Wotofo Profile 1.5 RDA (Rebuildable Dripping Atomiser) has been designed for advanced users and offers a good introduction to rebuildable atomisers. Unlike standard RDAs, the Profile 1.5 doesn't have to be used with wound rebuildable coils, rather, specialist mesh strips can be used. Available in three different resistances, there are versions to suit different vaping styles.
Featuring a stainless steel build and quality machining throughout, the Profile 1.5 is easy to disassemble and perform everyday maintenance on. The revamped build deck features a clamp design to make coil fitting a quicker task. These clamps will securely hold the flat mesh designed especially for this RDA, but also a range of other rebuildable coil types.
Incredibly versatile, this RDA comes with two firing pins, a standard gold-plated 510 pin allowing to be used with a range of sub ohm devices; as well as a hollow BF pin, when using this pin, the Profile 1.5 can be paired with squonk devices. To control vapour flow, the dual adjustable airflow can be opened or closed allowing for increased or decreased vapour production.
When it comes to selecting a level of vapour production to best suit your style, there are three Wotofo Mesh strip coils to choose from - NexMESH Chill A1 0.15 Ohm coils, NexMESH Turbo A1 0.13 Ohm coils and the NexMESH Extreme A1 0.16 Ohm coils.
Important information about Rebuildable Dripping Atomisers:
Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.
Before building or using an RDA you should have a thorough knowledge of battery safety, Ohm's Law and vaping in general.
Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.
Do you have a question about this product? Why not ask our expert team.
Registered members earn £0.50 in loyalty points for every published product review!
By Dazza from Herts
Really good RDA. Mesh strips give much more flavour and lifespan. Really easy deck to build on. Very novice friendly thanks to the spring loaded base that keeps the cotton pressed against the mesh minimizing dry hits if it's not built correctly.
By Connor from Worthing
The flavour you get off of this rda with the mesh is unmatched by any other tank or rebuildable on the market today. Enough said. If you’re a flavour chaser you NEED to buy this
By Jamas from Northampton
OK - i must say - really good flavour, and comparing to coil build much more energy saved. dropped down half with Watts and still have same amount of cloud. Deep well saves from leaking. Easy to use and assemble. Cloud seems much cooler and it is strange at the beggining , just get used to it.
The only downside is that it feels ... wobbly between base and the tank. It just could be a bit more tight as when you want to remove mouth piece whole tank moves and feels like you will take it off way too easy. -1star for it.
Except that little issue --- IT'S BRILLIANT - LOVE IT. (and in Vapeclub i found it cheapest in UK ;) )
By PJ from Cambridgeshire
I have two Wotofo Profile V1's & love them, so was keen to buy the V1.5. Straight out the box & it's obvious the tank feels cheaply made as Wotofo have reduced the width of the walls of the tank to make space for a bigger deck.
On mine, this resulted in the tank wobbling at the slightest touch, eventually leaking. Wotofo have made a bad choice to make the tank sides thinner to enlarge the deck size instead of making the tank a bigger diameter with the same thickness as the V1. If you have the V1 & buy a V1.5 you will see the difference.
The taste is very good as a result of bigger mesh & more surface area however the cheaply made tank is a deal breaker. I recieved mine today & it's going back tomorrow. A massive oversight by Wotofo !
Brought one super simple to set up iv never used a RDA before
By Richard from Prudhoe
What if I told you that you could vape all day with superb flavour (and clouds if you wish) and yet spend around £25 a year on coils? Unlikely you would believe me right? But that's the reality of the Profile V1.5.
I've already had over a year's experience with the V1.0 & I was more than impressed with that but the V1.5 is a big step forward.
Tank users are understandably hesitant about building & wicking coils. Wotofo have this solved with their pre-built mesh coils & cotton, combined with an oh so simple method of putting them on the deck.
Even with the build problem solved, some will be put off by having to drip juice instead of the luxury of filling a tank.
No problem again. My V1.5 sits on top of a squonk mod - which can also be used with a normal tank. This mod comes with a 10ml bottle so gives you all the convenience and more of a tank whilst the V1.5 gives you all the extra flavour joy of an RDA.
I was spending around £150 a year on high end coils and they were very good. With the V1.5 I'ved saved well over £100 a year and therefore paid for the RDA & mod in around 6 months.
On top of that my vaping enjoyment has been considerably improved.
What more could you ask?
By Lure fishing kev from Rickmansworth
Picked up a profile today from vape club as I've been thinking about giving a mesh rda a go for a while now anyways nothing ventured nothing gained how plesed am I I would say it's a dream to fit the mesh just bend it correctly with tool supplied another nice touch there I'm using the chill mesh at the moment flavor production is fantastic and boy does it Chuck a cloud or two and I got a free 10ml tester from vape club so all in all a brilliant purchase from the guy's at vape club everybody needs one of these in there lives
By MotherChugger from UK
Ok so better start off by saying that this is my first RDA so not too much to compare it to but it is amazing.
Really easy, even for a first timer like me, to get it set up and going. No hassle, no mess, no failures. First time set up and it fired like nothing I've ever experienced.
Mesh coil design is a brilliant one, especially with the spring loaded board at the bottom pushing your cotton against the mesh.
Got it running on the Wotofo squonk mod and there's no mess. Don't need to worry about having a bottle in my pocket.
I am now Wotofo's biggest fan! Official
By Shady from Glasgow
Top notch RDA, had a few different ones but couldn't get into them so kept going back to a tank (Falcon King) with pre-built coils, decided to take a chance on this and I'm so glad I did. The flavour is out of this world, using the 'chill' mesh atm at 75W and it vapes like a dream and it's so easy to build on I would echo what was said in the previous review though and watch the Wotofo vid on how to wick it properly.
By Vape Nate from London
I should start by saying that I've tried several RDAs and RTAs in the past, and I've always gone back to using a tank. With a tank I just get a much smoother and flavourful vape, my tank of choice being the Falcon King.
So I bought this RDA thinking meh I'll probably hate it but I'll see what the hype is about....
But this RDA has blown my mind. The flavour is BETTER than falcon mesh coils, and the draw is as smooth as butter.
I'm also pretty useless when it comes to building RDAs, my coils are always too tight, too loose, or my cotton doesn't wick well. But now all my troubles are gone. This was the EASIEST build I've ever done. Currently using the turbo mesh and the wotofo 6mm cotton. And it was so easy to build. I would recommend watching the wotofo video on how to wick (where you trim the bottom of the cotton not the top), as this has made it perfect for me.
Overall this is a fantastic product. Believe the hype on this one. I never had the profile v1, and I'm wondering why I missed out on it for a year. Would 100% recommend this dripper. It's amazing