£59.99
The GeekVape Aegis squonk kit combines multiple protections with a classic squonk design. Recommended for advanced vapers, it’s capable of a 100W max output and is powered by a single 18650 vape battery (sold separately). The GeekVape Tengu RDA completes this kit, featuring parallel dual airflow and dual capabilities it is capable of producing large amounts of vapour - ideal for sub ohm vaping.
Features:
Like the rest of the Aegis range, the Aegis squonk is very robust and boasts IP67 class protection, meaning it is waterproof, dustproof and shockproof. While robust, the ergonomic design of the device means it sits very in the hand. Fitted with an AS-100 chipset you'll experience not only a fast ramp-up (reportedly less than 1-second) but also customisable output modes including Variable Wattage and Temperature Control.
Unlike classic squonk devices, refilling the large capacity squonk bottle doesn’t require the kit to be disassembled. A tactile sliding port has been fitted to the top of the device, that when slid will reveal a large filling port, this port will fit most bottle nibs, including those larger shortfill bottles. The squonk bottle and it's seals are of a high quality, which means you don't have to worry about leaks, while the feed line is wide enough for a strong flow of liquid when the bottle is squeezed.
Quick and efficient coil fitting is a key feature with the Tengu RDA, and this is very evident when you look a the three post deck. Unlike classic decks, coils won't need to be trimmed before fitting making set-up that bit quicker. The dual adjustable airflow features a honeycomb design that not only reduces spit back, it also gives the user a greater degree of control when it comes to finding their ideal inhale. To better top leaking this airflow is higher set and sits parallel to the coils.
Contains:
Important information about Rebuildable Dripping Atomisers:
Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.
Before building coils or using an RDA you should have a thorough knowledge of battery safety, Ohm's Law and vaping in general.
Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.
Do you have a question about this product? Why not ask our expert team.
By Dazza from Herts
Great mod, easy to use. Bomb proof. But unfortunately has an internal failure point. The small plastic bar that holds the squonk bottle in place after several removals will snap which means the bottle will then not be held in place and the mod will be unable to squonk liquid into the coil
By Vape Queen from SE England
I’m happy with this kit . Very lightweight and comfortable in the hand . Easy And secure battery access. As most MODs it’s simple to turn on and go . It’s ideal for me as it’s waterproof and robust . The twin coil is a dream to set up , no fafing .coils go straight in with a bit of a twist to adjust to correct angle . These can be cut easily after tightening . I get about 7-8 hrs on 18650 vaping at 50w , depends if I’m rinsing it .
Couple of small grumbles . Although tank access is tight and easy , it is close to the RDA so if filling from bigger bottles you have to remove the RDA . RDA cover is a bit loose, changed the seals and didn’t make any difference .
******Vape club feed back *****
The MOD came with a manufacture missing part . Contacted by mail to report and James called me back to resolve the issue promptly. The missing part was sent along with a lovely little free gift. Brilliant customer service as always with Vapeclub . Thanks .
By Luke from Hertfordshire
Great rda easy to wick and flavour and clouds for days. Instant ramp up on the mod aswell.sqounks really well aswell. I would highly recommend this sqounk kit