What Are The Best Adjustable Wattage Vape Kits To Buy?

Starting things off is the Uwell Caliburn G3! Even though it's quite a compact kit, it boasts a large 900mAh battery. With an adjustable output range of 5-25W, and a wide selection of compatible Caliburn G3 pods, this kit can support MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Whether you’re looking for a discreet vape or something with a little more power, the G3 is a good choice.

All Caliburn G3 pods, including the 0.6 Ohm and 0.8 Ohm pods that come with the G3 kit, work best with 50% VG e-liquids. You can easily top these pods up without removing them from your device – just remove the mouthpiece. Plus, the built-in coils mean you only have to swap out the pod once the coil starts to burn out, keeping maintenance to a minimum.

The Vaporesso Xros Pro is one of our most popular kits and comes in at number two. Don't let the name fool you, this device is still beginner-friendly – just like other Xros devices. What puts the Pro ahead of similar kits is that it features Smart, Power and Eco Mode as well as the option to adjust the power output between 5-30W.

It's compatible with the full range of Vaporesso Xros pods, with resistances between 0.4 Ohm and 1.2 Ohm, as well as Deliciu Mate prefilled pods. The refillable Xros pods feature a leak-resistant design and built-in coils – and depending on which resistance you go for, you can pick between high PG, 50% VG, or high VG e-liquids. For a more in-depth look at this kit, check out our Vaporesso Xros Pro review!

If it's a sub ohm kit you’re after, then look no further than the Smok Nord 5. Its small and compact build houses a powerful 2000mAh battery, and it features a 5-80W variable output for DTL vaping. Simply set your power output to change how much vapour it creates! This is one of the simplest sub ohm kits.

Smok Nord 5 replacement pods feature a side-filling design and are compatible with the Smok RPM 3 coils. The mesh design of the RPM 3 coils allow for more e-liquid to be heated at a faster rate to boost flavour and improve vapour production. As the coils are removable, they can be swapped out for new ones once the coils start to burn out.

Looking for something a bit more powerful? Try the Voopoo Drag S2! This customisable vape kit is perfect for when you want to experiment with different levels of vapour. Adjust the 5-60W power output and its handy display screen will confirm your settings. Compatible with Voopoo’s PNP X pods, you can swap between their MTL and DTL options with ease.

The full Drag S2 kit includes a Voopoo PNP X DTL pod, equipped with 0.2 Ohm and 0.3 Ohm coils. Both options pair best with a 70% VG e-liquid and will produce an airier DTL inhale. Use the 0.2 Ohm between 32-40W, and the 0.3 Ohm between 40-60W. This pod also works with the full range of MTL PNP X coils, so you can swap to something more discreet if you prefer.

Keeping things simple, the Geekvape Wenax Q Pro is perfect if you want a durable device that can be fine-tuned to deliver your ideal level of vapour. Boasting three different modes, you can adjust the wattage yourself with Power Mode, use Smart Mode for a quick set-up, or stick with Eco Mode to save battery. Plus, it features a handy shock resistant base, just in case you're a little clumsy.

Geekvape Q replacement pods are available in a wide range of resistances that allow the Q Pro kit to support MTL and RDTL vaping. For best results, use the included 0.6 Ohm and 0.8 Ohm pods with a 50% VG e-liquid, and they'll produce an airier amount of vapour for a RDTL inhale.

Our next choice can pretty much do it all, so it's perfect if you're looking for an upgrade. The Aspire Zelos 3 combines a hardwearing design with a 1-80W adjustable output, and a smart ASP chipset. With four modes to choose from, its handy Variable Wattage mode lets you adjust the power output to match any coil you pair with your tank.

Speaking of tanks and coils, the Nautilus 3 vape kit is equipped with the Nautilus 3 tank and two coils in 1.8 Ohm and 0.7 Ohm resistances, allowing your kit to support MTL and RDTL vaping. Once the coils have burnt out, remove them from your tank and replace with new ones!

If it’s something compact you’re after, check out the Uwell Caliburn G4 Pro Koko! The second Caliburn on our list, this pocket-friendly pod kit is equipped with a 2000mAh battery that will last for longer between charges and is capable of a 35W power output. Use Waves Mode if you want to extend your battery life, Storm Mode for more vapour and stronger flavour, or Variable Wattage Mode or Custom Mode to find your ideal power level.

This kit is compatible with both Caliburn GPP pods and Caliburn G3 pods, and between these two ranges, you can pick from resistances between 0.4 Ohm and 1.2 Ohm. Use the higher resistance pods if you’re looking for an authentic MTL inhale and a discreet amount of vapour, or try the lower resistances if you prefer a more relaxed RDTL inhale.

If you're after a powerful kit that's still lightweight and small enough to take with you on-the-go, look no further than the Innokin Gozee vape kit! Featuring a 5-60W variable wattage, it's simple to find a power level that works for you. Plus, the Gozee mod features a 510 connection, so you can pair it with most tanks on the market.

The included Go Z tank uses Innokin Zenith coils that are available in a wide range of resistances. To no surprise, this versatile kit can produce lower levels of vapour, or increased amounts, just by swapping out your coil and e-liquid.

Pocket-friendly pod kits are all well and good, but if you’re looking for the highest possible power output, a bigger box mod kit like the Geekvape Aegis Legend 5 can't be beaten. With a maximum wattage of 200W and compatibility with all Geekvape Z coils, this kit is a solid choice if you’re looking for a DTL vape. It’s powered by two 18650 batteries (sold separately), which can be replaced when they wear out – with no need to buy a whole new kit.

The included Z tank works with Geekvape Z coils, which are available in resistances between 0.15 Ohm and 0.4 Ohm. These coils feature a mesh build, which means they heat your e-liquid quickly to deliver better flavour and more vapour. They work best with 70% VG e-liquid.

The Vaporesso Armour G is a good choice if you want something that balances the high battery capacity of a box mod kit with the compact design of a pod vape. Part of Vaporesso’s Armour series, it’s shock and water-resistant, too – so it’s ideal for vaping on the go. As well as Variable Wattage Mode, you can also pick from Pulse Mode, which boosts flavour and vapour, and Eco Mode, which helps save on battery.

The Armour G is compatible with GTX coils, which are available in a huge range of resistances between 0.15 Ohm and 1.2 Ohm. This means that you can use this kit for MTL, RDTL and DTL vaping, and change your vaping style simply by swapping your coil. Depending on which resistance you pick, you can pair this kit with both 50% VG and high VG e-liquids.