Coilology Chainlink 10ft Wire Reel

The Coilology Chain Link coil wire gives you the option to create your own rebuildable coils - quickly. Each spool contains a 10ft (304cm) of pre-constructed Chain Link wire. This multi-strand design can be very fiddly to build yourself, this Coilology reel is an easier option as all you’ll have to do is trim your preferred amount of wire and then wrap it into a coil. There are two versions of this wire available, which in turn gives you two different vape styles to try.

Features:

• Pre-Built Coil Wire
• 10ft. (304cm) Of Wire Per Reel
• NiChrome Or Stainless Steel
• MTL/DTL Vaping
• Compatible With A Wide Range Of Rebuildable Atomisers

Both versions of this coil feature four interlocking wires that can trap e-liquid in its grooves when built. This means improved flavour as more e-liquid is heated at a faster rate, while the gaps also allow for more air to pass through. The Stainless Steel version of this wire can be used in both Temperature Control and Variable Wattage mode, the Ni80 (NiChrome) variant will not support TC vaping but has a faster ramp-up.

Contains:

• 10ft. Coilology Chain Link Coil Stainless Steel Wire (28G x 4)
OR
• 10ft. Coilology Chain Link Coil NiChrome Wire (28G x 4)

Important information about rebuildable vape coils:

Rebuildable coils like these can only be used with rebuildable atomisers, such as RDTAs, RTAs and RDAs. We would only recommend these types of coils to advanced vapers, who have a thorough understanding of vaping, Ohm’s law and battery safety. Rebuildable coils will need to have cotton wicks fitted to them before use, these are available separately.

Before use, all rebuildable coils should be tested on Ohmmeter (never a vape device) to check they are registering the correct resistance and are firing correctly. Please note that when using a dual coil build, the resistance of your coils will halve. For example, two 0.4 Ohm coils fitted to a rebuildable atomiser will register 0.2 Ohm. Different types of coil can not be mixed and matched.